I would like to have a little knowledge about how to sew curtains, you do not need to move to. While the curtains that are sewn take longer, but you can make curtains out of lighter material without sewing a stitch on.
First, you are a web, the bonding of iron is used, and need a damp cloth. Thus, the carpets are together, without stopping the use of thread. This binding material can be used by materials when the width of the material is not wide enough to join the appropriate size panelfor your windows. They are with clips to hang the curtains, because it is the easiest way to precisely lined hanging light curtains. The clips are on top of a double-hem applied, and they can be hung from a small staff than heavier curtains. You should find a good quality, are lightweight fabric in the color you use on demand to your curtains.
Now you need the type of rod you will use to decide to hang your curtains. Remember to accept the pole must be of adequate size toThe robes rings and clips, which you will choose. Make sure the tail is a little larger than your window to allow for fullness. The rod should be measured and that measurement should be multiplied by at least 1.5 to 2 times (1.5 inches to the side seams) to get the desired fullness of the curtain, as soon as it hangs. You will then divide this number by the width of the fabric are using, and around them to the next whole number. This is how many plates of the materials you need to make yourCurtains wide and full enough.
When measuring the length you need to consider the length of the clip. To do this properly, put the clips on the rod and measure from where you hang your curtains from the clip to the length of your curtain want to end. Once you have figured out the length you need) add up to 8 inches (4 "on the floor and 4 for the upper seam. If you have a matching pattern on the fabric, you must allow a bit more in order to correctly match the pattern.
ToThey assume the widths of fabric, you are the first cut length on a flat surface, lay the right-side up and place a 1 / 2 inch strip of Web-binding to the lug to be connected to another panel. Turn 1 / 2 inch seam down the flap of the second panel and press. Insert the second track at the beginning of the first, right side up, with the seam on the binding strip. Now is the time to match your pattern. Press material with a hot iron over a damp cloth to seal the seam. Contact anyOther lengths by clicking on the inner edge.
Turn 1 / 2 inch and then 1 inch on each side of the panel and press. Place a 1 "strip of adhesive material at the fold and press with the iron and damp cloth on the side seams. Turn 1 inch and then another 3 inches for the top hem. Insert a 1-inch binding strip at the top fold and press with iron and a damp cloth. For the hem, fold the material is a dual 2-inch, pin and make sure to adjust the length, if necessary. Put a 2Inch binding strip to the length of the plate and press with iron and damp cloth.
Your curtains are finished, and now you can press and hang them.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น