For those of you who do not know, a traverse curtain rod used to open a simple role and close your curtains. Here are some pointers on what you go through your own rods publishing a breeze.
What you need
Curtain rod, brackets and screws (Complete Set)
Ladder and Step Stool
Pencil
Drill
Screw Driver
Measuring Tape
Hollow Wall Anchors (if necessary)
Instructions
First, you mustThey measure your windows so you can see, where to install the brackets. You need an additional 2 cm are stacked on both sides of the window frame allow measure for curtains, ripped though. The curtain rod should sit about 4 inches above the top of the window.
Insert your brackets on the wall at a distance of about 40 cm wide. Mark the wall with a pencil where you need to drill the holes for the screws to enter this for all the mounting brackets.
Use your power drill,make small holes for the screws to fit. Be careful not to drill too wide, so the screws can not thread properly in the wall. If you are not drilling into studs you need to use hollow wall anchors to ensure that your curtain rod secure.
Attach the brackets to the wall, they bolted into place with a screwdriver.
You are now ready to install the curtain rod. To push the rod into the brackets until it clicks into place. Once you position the barproperly secure it in place by tightening the cam bolts.
Attach the curtain pulley on the wall directly under the string opening. You can now open the line and close the carrier. Unplug the power cord curtain, until you get the desired length to bind, then fasten it into a knot and trim the excess cable.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น